HKZ jetty handed over

The jetty that will be used to transport staff and equipment during the construction and O&M phases of the Hollandse Kust Zuid offshore wind farm has been handed over to Vattenfall.

TetraSpar Demo stands

Stiesdal has assembled and installed its TetraSpar Demonstrator floating wind turbine.

Fugro and partners unveil new tech for floaters

A consortium led by Fugro has designed a mooring line fatigue tracker for floating wind turbines

Japan's first floating wind winner announced

METI and MOLIT has selected a Toda Corporation-led consortium of six companies to build a 16.8 MW floating wind complex in the Goto area.

Proposed Sale Notice published: up to 7 GW in the New York Bight

The US Department of the Interior has announced a proposed sale for offshore wind in the New York Bight, between Long Island and the coast of New Jersey.

Korsnäs commences environmental surveys

Metsähallitus has commenced environmental surveys for its 1.3 GW Korsnäs offshore wind farm, located in the Gulf of Bothnia, 15km off Finland.

First drilled monopile in at Saint-Nazaire

DEME Offshore has successfully installed the first drilled monopile at the 480 MW Saint-Nazaire offshore wind farm.

Dublin Offshore develops Load Reduction Device, targets floating wind

Marine energy solutions provider Dublin Offshore has developed a Load Reduction Device (LRD) for floating offshore wind moorings.

Konsberg to design and deliver for Awind

Konsberg Maritime has won a contract valued at NOK 250 million to design and equip two construction service operation vessels for Awind

Construction kicks off at Sofia

RWE has commenced construction for its 1.4 GW Sofia offshore wind farm, its largest renewable energy project.

NnG appoints Scottish companies for O&M base

The 450 MW Neart na Gaoithe (NnG), which will be built offshore Scotland, has appointed two Scottish companies to construct its O&M base at Eyemouth Harbour.

Halfway milestone at Moray East

50 of 100 turbines are up at the UK wind farm.

First steel cut for Hollandse Kust (west Alpha) topside

ENGIE-lemants and TenneT stated that topside fabrication commenced last week. The nodes and plate girders that were cut are the project’s first building blocks.