4C is now TGS

We are excited to announce a significant milestone in 4C Offshore's journey. Our integration into the TGS family marks the beginning of a new era in offshore wind market intelligence.

Learn what this means for you!

Hywind Tampen delayed due to supply chain struggles

By: Tom Russell 13/07/2022 Equinor

Floating Foundations General Turbines Windfarms

Equinor revealed that it has pushed back the planned installation of four turbines at its Hywind Tampen floating wind project. The first seven turbines will come on stream this year as planned with the final four will be installed next spring.

Equinor stated that supply chain bottlenecks, most notably related to the global market for steel, preclude delivery of the final four tower sections for the wind turbines until September 2022. This will be too late in relation to the installation weather window for the year, postponing installation of the remaining four turbines until next year.

“Seven turbines have been assembled and four are now installed on the field. The plan is to start production during the year and supply electricity first to Gullfaks, then to the Snorre field," says project director Olav-Bernt Haga.

Siemens Gamesa is the supplier of towers, nacelles and blades, all subject to rigid quality control measures. Deviations in steel quality in four tower sections were found, and corrective actions were immediately implemented. The difficult market situation for steel has however delayed delivery. Siemens Gamesa is working closely with their suppliers and Equinor to expedite all deliveries. The seven turbines already assembled have been tested and meet all quality specifications.

Hywind Tampen is an 88 MW floating wind power project intended to be the world’s first floating wind farm to power offshore oil and gas platforms. It will connect to the five Snorre A and B, and Gullfaks A, B and C platforms, located approximately 140 km off the Norwegian coast.

The floating wind farm will consist of 11 SG 8.0-167 DD wind turbines based on one of Equinor’s floating offshore wind technologies, Hywind. With a 167 m-diameter rotor and 81.5 m-long blades, each turbine of the wind farm will have a swept area of 21,900 m².

The project is estimated to meet about 35% of the annual electricity power demand of the five Snorre A and B, and Gullfaks A, B and C platforms. The wind power solution will help reduce the use of gas turbine power for the Snorre and Gullfaks offshore fields, while also offsetting 200,000 tonnes of CO2 emissions and 1,000 tonnes of NOx emissions per year. It will be operated from Equinor’s offices in Bergen.

For more information on offshore wind farms worldwide, click here.

Premium

4C Offshore Premium, our most popular subscription, gives you full access to use the 4C Offshore WebApp which includes exclusive offshore wind, transmission and vessel reports, news and downloads.

Request a 30 minute Demo

Hywind Tampen delayed due to supply chain struggles

Back to News

Trending News!